Emerson FB1100 Saha Değiştirme Kılavuzu - Sayfa 5

Aksesuarlar Emerson FB1100 için çevrimiçi göz atın veya pdf Saha Değiştirme Kılavuzu indirin. Emerson FB1100 14 sayfaları. Flow computer coin cell battery field
Ayrıca Emerson FB1100 için: Sonlandırma Panosu Saha Değiştirme Kılavuzu (18 sayfalar), Değiştirme Kılavuzu (18 sayfalar), Saha Değiştirme Kılavuzu (20 sayfalar), Saha Değiştirme Kılavuzu (8 sayfalar), Saha Değiştirme Kılavuzu (8 sayfalar), Değiştirme Kılavuzu (8 sayfalar)

FB1100/FB1200 Flow Computer CPU Module Field Replacement Guide

Flow Computer CPU board with solar/Enersys lead acid battery charge board Field Installed



Accessory Kit Part No. 399381-02-0 for use with UL Listed Model Series FB1100 and FB1200.

CAUTION

If your flow computer uses lead acid battery pack 399186-01-8 and you need to replace the CPU

and battery charge board, you must select kit 399381-01-0 because the 399186-01-8 battery is

not supported by the Enersys charge board.

Remove the front and rear end caps. Remove the retaining clamps on the end caps (if

present) using a 3 mm hexagonal wrench.

Components of Retaining Clamp Assembly

Screw

Retaining Clamp

Washer

Grasp the end cap.

Front End Cap

Unscrew the end cap by turning it counter-clockwise until it comes off. Set the end cap aside

in a safe location.

Note

If you need more leverage, place a long screwdriver or other appropriate tool across the two

notches in the end cap to act as a pry bar.

Rear End Cap

D301802X012

November 2020