AFL MFT Manuel de référence rapide - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de référence rapide pour {nom_de_la_catégorie} AFL MFT. AFL MFT 17 pages. Multi-fiber identification system
Imprimer la page
Power Button provides two functions as follows:
1
1
– Press the Power button to turn the MFP power meter On or Off.
Notes: MFP will power up in the same mode it was set to when it was
powered Off. MFP automatically turns Off after five (5) minutes of inactivity.
– Press and hold the Power button during power up until "P on" is displayed to
disable the Auto Off feature.
Note: MFP stays powered up until the Power button is pressed to turn it Off.
Fiber ID Button enables/disables Fiber ID mode.
2
2
– When MFP operates in standard power meter mode, pressing the Fiber ID
button will enable Fiber ID mode that allows MFP to report loss and fiber ID
from MFT's signal.
– Pressing the Fiber ID button again will disable Fiber ID mode and enable
standard power meter mode.
MFP Controls and Interfaces
W
dB
4
dBm
5
1
1550
n m
1.25 dBm
Id
5
Set
Ref
Fiber
ID
MFP
4
7
6
3
2