AFL MFT Короткий довідник - Сторінка 4

Переглянути онлайн або завантажити pdf Короткий довідник для Випробувальне обладнання AFL MFT. AFL MFT 17 сторінок. Multi-fiber identification system

Power Button provides two functions as follows:

– Press the Power button to turn the MFP power meter On or Off.

Notes: MFP will power up in the same mode it was set to when it was

powered Off. MFP automatically turns Off after five (5) minutes of inactivity.

– Press and hold the Power button during power up until "P on" is displayed to

disable the Auto Off feature.

Note: MFP stays powered up until the Power button is pressed to turn it Off.

Fiber ID Button enables/disables Fiber ID mode.

– When MFP operates in standard power meter mode, pressing the Fiber ID

button will enable Fiber ID mode that allows MFP to report loss and fiber ID

from MFT's signal.

– Pressing the Fiber ID button again will disable Fiber ID mode and enable

standard power meter mode.

MFP Controls and Interfaces

dBm

1550

n m

1.25 dBm

Set

Ref

Fiber

MFP