Galvin Engineering Assist 41978CP Manuels d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuels d'installation pour {nom_de_la_catégorie} Galvin Engineering Assist 41978CP. Galvin Engineering Assist 41978CP 5 pages. Hand shower with inverted centre t 700x1100 ss hygienic grab rail

Imprimer la page
Product Installation Guidelines
5. Fit grab rail into wall mount plate and
tighten lock nut firmly.
7. Cradle Installation
-
Fit the shower cradle to the grab rail as
shown.
-
Position the cradle as desired then tighten
the cover of the cradle.
Elbow
9. Connect Flange Wall Outlet Elbow
-
Fit elbow over spigot and secure with grub
screw.
-
Using 2.5mm hex key supplied, tighten 5mm
grub screw.
© Galvin Engineering Pty Ltd
6. Screw flange cover to wall mount plate.
8. Connect Flange Wall Outlet Elbow
-
-
-
Hex Key
10. Check Shower for correct operation
-
the connection is secured, then turn on water
supply. Check for any leaks.
Version 1, 4
Version 1, 4 September 2023, Page 4 of 5
Flow Regulator
Spigot
Apply thread tape to wall spud. When
applying thread tape or sealant to the wall
spud, ensure the opening is not obscured.
Failure to do so may restrict or block the flow
restrictor, affecting the flow of water.
Remove spigot by loosening grub screw in
elbow.
Fit spigot to wall spud, ensuring the flow
regulator is in place and not damaged when
tightening the spigot.
and leaks
Connect hose and shower head ensuring
th
September 2023, Page 4 of 5
Grub Screw