Galvin Engineering Assist 41978CP Manuais de instalação - Página 4

Procurar online ou descarregar pdf Manuais de instalação para Produto de canalização Galvin Engineering Assist 41978CP. Galvin Engineering Assist 41978CP 5 páginas. Hand shower with inverted centre t 700x1100 ss hygienic grab rail

Imprimir página

Product Installation Guidelines

5. Fit grab rail into wall mount plate and

tighten lock nut firmly.

7. Cradle Installation

Fit the shower cradle to the grab rail as

shown.

Position the cradle as desired then tighten

the cover of the cradle.

Elbow

9. Connect Flange Wall Outlet Elbow

Fit elbow over spigot and secure with grub

screw.

Using 2.5mm hex key supplied, tighten 5mm

grub screw.

6. Screw flange cover to wall mount plate.

8. Connect Flange Wall Outlet Elbow

Hex Key

10. Check Shower for correct operation

the connection is secured, then turn on water

supply. Check for any leaks.

Version 1, 4

Version 1, 4 September 2023, Page 4 of 5

Flow Regulator

Spigot

Apply thread tape to wall spud. When

applying thread tape or sealant to the wall

spud, ensure the opening is not obscured.

Failure to do so may restrict or block the flow

restrictor, affecting the flow of water.

Remove spigot by loosening grub screw in

elbow.

Fit spigot to wall spud, ensuring the flow

regulator is in place and not damaged when

tightening the spigot.

and leaks

Connect hose and shower head ensuring

September 2023, Page 4 of 5

Grub Screw