AGS Mini Merlin CH4CO Manuel d'installation et d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AGS Mini Merlin CH4CO. AGS Mini Merlin CH4CO 16 pages. Dual gas detector, methane & carbon monoxide gas
Également pour AGS Mini Merlin CH4CO : Manuel de l'utilisateur (16 pages)

Imprimer la page

1. Wiring the Device

Installation & Operation Manual

Fixing

Unpack all the parts!

This device is designed for surface mounting using 2 mounting screws (not supplied) and must

be installed by a licensed, insured contractor.

Carefully remove the rear cover from the unit.

Using the rear cover - mark the screw holes to the wall.

Ensure the wall surface is flat to prevent base distortion.

There are two pre-fractured areas for cable entry and a divider to separate low and

high voltage connections.

Placing at eye level allows for optimum monitoring of the digital display screen, or as

guide, 5 feet (1.5 meters) from ground level.

After executing the mounting and connections – secure the rear cover.

Be careful when creating access for cables – Damage to boards will void any warranty.

Do not attempt to remove the Circuit Board! This will void any warranty.

Rev: 12 01-20

AGS Mini Merlin CH4CO