AGS Mini Merlin CH4CO Installation & Operation Manual - Page 6

Browse online or download pdf Installation & Operation Manual for Security Sensors AGS Mini Merlin CH4CO. AGS Mini Merlin CH4CO 16 pages. Dual gas detector, methane & carbon monoxide gas
Also for AGS Mini Merlin CH4CO: User Manual (16 pages)

Print Page
Installation & Operation Manual

Fixing

Unpack all the parts!
This device is designed for surface mounting using 2 mounting screws (not supplied) and must
be installed by a licensed, insured contractor.
1.
Carefully remove the rear cover from the unit.
2.
Using the rear cover - mark the screw holes to the wall.
Ensure the wall surface is flat to prevent base distortion.
3.
There are two pre-fractured areas for cable entry and a divider to separate low and
high voltage connections.
4.
Placing at eye level allows for optimum monitoring of the digital display screen, or as
guide, 5 feet (1.5 meters) from ground level.
5.
After executing the mounting and connections – secure the rear cover.
Be careful when creating access for cables – Damage to boards will void any warranty.
Do not attempt to remove the Circuit Board! This will void any warranty.
Rev: 12 01-20
AGS Mini Merlin CH4CO
6