Gama Sonic GSG2-150 Manuel d'instruction - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Gama Sonic GSG2-150. Gama Sonic GSG2-150 4 pages. Solar spot light with color lenses
Imprimer la page
Solar Spot Light Location
1. Place the solar spot light in a position where sun will shine directly on
the solar panel free from any obstacles and shade.
2. Make sure the solar panel is not going to be affected by any other light
source at night. Otherwise the light will not turn ON after dusk.
Assembly Instructions
NOTE: If the ground is hard and packed, moisten the ground with water before
inserting the stake to avoid possible damage to the unit.
1. Assemble stake (C) onto part (B) and part (B)
onto the solar panel body (A) then tighten the
included screw as shown in Fig. 1.
2. Assemble Stake (E) onto part (D) by turning
the wing screw (K) provided (Fig. 2).
3. You can choose your desire lens (F) from
4 available color lenses included (Fig. 3)
Insert the lens by removing part (G).
If you want to use white light skip this step.
4. Connect the wire from the light to the back of
the solar panel body (A) by gently pushing the
connector and tightening its knob around it.
5. In order to wrap the spare wire take out part (I)
by turning it counterclockwise (Fig. 5).
Insert the wire coming from the light where
it says IN, wrap the spare wire in part (J) and
take out the excess wire where it says OUT and connect
it to socket as explain in step 4 (Fig. 6).
Fig. 3
blue
yellow
red
Fig. 4
green
Fig. 1
A
B
C
Fig. 2
G
F
H
K
D
E