Gama Sonic GSG2-150 사용 설명서 - 페이지 2

{카테고리_이름} Gama Sonic GSG2-150에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gama Sonic GSG2-150 4 페이지. Solar spot light with color lenses

Solar Spot Light Location

1. Place the solar spot light in a position where sun will shine directly on

the solar panel free from any obstacles and shade.

2. Make sure the solar panel is not going to be affected by any other light

source at night. Otherwise the light will not turn ON after dusk.

Assembly Instructions

NOTE: If the ground is hard and packed, moisten the ground with water before

inserting the stake to avoid possible damage to the unit.

1. Assemble stake (C) onto part (B) and part (B)

onto the solar panel body (A) then tighten the

included screw as shown in Fig. 1.

2. Assemble Stake (E) onto part (D) by turning

the wing screw (K) provided (Fig. 2).

3. You can choose your desire lens (F) from

4 available color lenses included (Fig. 3)

Insert the lens by removing part (G).

If you want to use white light skip this step.

4. Connect the wire from the light to the back of

the solar panel body (A) by gently pushing the

connector and tightening its knob around it.

5. In order to wrap the spare wire take out part (I)

by turning it counterclockwise (Fig. 5).

Insert the wire coming from the light where

it says IN, wrap the spare wire in part (J) and

take out the excess wire where it says OUT and connect

it to socket as explain in step 4 (Fig. 6).

Fig. 3

blue

yellow

red

Fig. 4

green

Fig. 1

Fig. 2