Agtrix 380i Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Agtrix 380i. Agtrix 380i 20 pages.

P a g e

| 8

INNOVATIVE HARVEST MANAGEMENT AND SUPPLY CHAIN SOLUTIONS

INSTALLING THE LOGGER

The Logger Should be located in a secure position within the cabin, accessible for

replacement if required, and away from direct sources of heat, including sunlight, or

liquids.

A rubber washers should be fitted between logger and vehicle to minimised vibration

transfer. Avoid mounting too close to other radio equipment, antennas and cables to avoid RF

interference.

Prior to fitting make a note of the unit's serial number and ensure the label is easily

viewable within the vehicle cab for future commissioning and diagnostics.

Inspect for obvious signs of damage prior to fitting. Check integrity of all cables and

connectors.

There are therefore a number of potential wiring configurations

"380i - 2 Inputs Positive Engine (4) and Positive Elevator (5)" (default):

Input 4 - Engine (Positive triggering)

Input 5 - Elevator (Positive triggering)

Optional

Input 1 – Fan (negative triggering)

"380i - 2 Inputs Positive Engine (4) and Negative Elevator (3)"

Input 4 - Engine (Positive triggering)

Input 3 - Elevator (negative triggering)

Optional

Input 1 – Fan (negative triggering)

NOTE: For any other configurations other than the default, please

consult with Agtrix.

Agtrix Pty Ltd

Unit 6, 2 Bonanza Drive, Billinudgel NSW 2483, PO Box 63, New Brighton NSW 2483

Tel +61 (0)2 6680 1309 Email

The logger should be secured within the vehicle where it will

have minimal vibration to avoid contacts becoming

loose. Connecting cables may be positioned and secured to

avoid disengagement (consider use of cable ties for

example) Position the logger to avoid accidental damage by

equipment, tools and other implements.

Web:

www.agtrix.com

ABN 67103038508