HIKVISION AE-VC136T Manuel de l'utilisateur - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HIKVISION AE-VC136T. HIKVISION AE-VC136T 8 pages. Low illumination fisheye vehicle-mounted camera
Imprimer la page
Step 1
Choose a suitable mounting location to ensure the
camera catches the driver properly.
Pre-drill holes in the center of the mounting location.
The hole diameter is determined according to the size
of the wire harness, so that the wire harness can be
passed through the car. (If the structure of this section
is a side outlet, there is no need to punch holes and go
directly to step 4).
Step 2 Install the camera to a proper mounting place. Insert
the cable through the cable hole in the vehicle.
Figure 3-1 Install the Camera in Vehicle
Step 3 Fix the camera with screws to make sure it is secured.
Step 4
Adjust the camera to a desired angle to make sure it
catches the driver properly. Fix the camera angle with
screws using a hex screwdriver to complete
installation.
Figure 3-2 Fix with Srews
Figure 3-3 Adjust and Fix the Camera Angle
Set Screws × 2
Set Screw
7