HIKVISION AE-VC136T Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan HIKVISION AE-VC136T. HIKVISION AE-VC136T 8 halaman. Low illumination fisheye vehicle-mounted camera

Halaman Cetak

Step 1

Choose a suitable mounting location to ensure the

camera catches the driver properly.

Pre-drill holes in the center of the mounting location.

The hole diameter is determined according to the size

of the wire harness, so that the wire harness can be

passed through the car. (If the structure of this section

is a side outlet, there is no need to punch holes and go

directly to step 4).

Step 2 Install the camera to a proper mounting place. Insert

the cable through the cable hole in the vehicle.

Figure 3-1 Install the Camera in Vehicle

Step 3 Fix the camera with screws to make sure it is secured.

Step 4

Adjust the camera to a desired angle to make sure it

catches the driver properly. Fix the camera angle with

screws using a hex screwdriver to complete

installation.

Figure 3-2 Fix with Srews

Figure 3-3 Adjust and Fix the Camera Angle

Set Screws × 2

Set Screw