Adexa HSQ-962B Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Adexa HSQ-962B. Adexa HSQ-962B 6 pages. Electric cooker with electric oven

Imprimer la page

Instruction Manual

III、Electrical schematic diagram

N L1 L2 L3

ST1

EH1

HL7 HL1 EH2 HL8 HL2

EH1 / EH2--------Baking furnace heating pipe

ST1 / ST2---------Thermostat

HL1～HL6-------Thermostat

Ⅳ、Operation procedure：

1、To check whether the installation of power supply is normal, it is necessary to ensure that

the supply voltage is in line with the furnace voltage.

2、Four gear switches are set on the front panel of the furnace body, which can be used

independently or simultaneously. Each switch corresponds to a heating plate. Each

temperature control of the baking furnace corresponds to the upper and lower heat pipes.

3、Turn on the power supply and the green indicator lights on. At this time, the current has

been supplied to the furnace. There are three gears in each switch of cooking oven.

According to their own needs, they are the largest in three gears, the middle in two gears

and the smallest in one. The oven rotates the thermostat clockwise and adjusts it to the

desired position. At this time, the yellow indicator lights up, indicating that the heating

pipe has been working and began to heat up.

4、When the temperature rises to the set temperature, the thermostat can automatically cut

off the power supply, at the same time the yellow indicator lights out and the heating

pipe stops working. When the temperature drops slightly, the thermostat can

automatically switch on the power supply, the yellow indicator lights up, the heating

pipe resumes work, and the temperature rises. Such repeated circulation ensures that the

furnace body keeps constant temperature within the set range.

5、When the work is finished, please rotate the thermostat in a counter-clockwise direction

and cut off the power supply to ensure safety.

6、 Be sure to cut off the power supply of the cooker before cleaning and maintenance. When

the stove surface is cooled, the neutral detergent or clear water is dripped on the stove

surface and wiped with paper towel or soft cloth.

7、No corrosive or irritating chemical reagents shall be used. Cleaning and maintenance of

HL9

HL3

SD1

2 3 4

ST2

4 2

EH3

HL10

HL11

HL4

HL5

SD2

SD3

2 3 4

3 4 2

EH4

EH5

EH3～EH6--------Cooking stove tray

SD1～SD4--------Gear switch

HL7～HL12-------Heating indicator

HL12

HL6

SD4

2 3 4

3 4 2

EH6