Centre Point 400114 Manuel d'instruction - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Centre Point 400114. Centre Point 400114 11 pages. Crossline laser level
Imprimer la pageUsing the Laser (continued)
POWER SUPPLY
The laser level is powered by two AA alkaline
•
batteries.
BATTERY REPLACEMENT
Remove the battery cover door and the
•
batteries.
Insert the batteries according to polarity and
•
replace the battery cover door (Fig.1 & Fig.2).
SET UP
Select a place as close as practical to the work
•
site. Ensure the location is clear of traffic.
Place the laser level on a level surface such as a
•
bench or mount.
FIGURE 1
4
OPERATION
To turn the laser level on, slide the power
•
switch to the "on" position. Self levelling will
commence and all the beams will activate.
If the laser level is outside the self levelling
•
range the laser beam will turn off. If this occurs,
reposition the laser level onto a level surface
until the laser level can level off and laser
beams will reactivate.
The laser diode is visible up to 20m indoors
in ideal light conditions. Operating range
will be significantly reduced under very
bright outdoor conditions.
To turn the laser level off, slide the power
•
switch to the 'off' position. Always turn the laser
level off before moving the laser level around
the job site.
FIGURE 2