Centre Point 400114 Руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Лазерный уровень Centre Point 400114. Centre Point 400114 11 страниц. Crossline laser level

Using the Laser (continued)

POWER SUPPLY

The laser level is powered by two AA alkaline
batteries.

BATTERY REPLACEMENT

Remove the battery cover door and the
batteries.
Insert the batteries according to polarity and
replace the battery cover door (Fig.1 & Fig.2).
SET UP
Select a place as close as practical to the work
site. Ensure the location is clear of traffic.
Place the laser level on a level surface such as a
bench or mount.
FIGURE 1
4

OPERATION

To turn the laser level on, slide the power
switch to the "on" position. Self levelling will
commence and all the beams will activate.
If the laser level is outside the self levelling
range the laser beam will turn off. If this occurs,
reposition the laser level onto a level surface
until the laser level can level off and laser
beams will reactivate.
The laser diode is visible up to 20m indoors
in ideal light conditions. Operating range
will be significantly reduced under very
bright outdoor conditions.
To turn the laser level off, slide the power
switch to the 'off' position. Always turn the laser
level off before moving the laser level around
the job site.
FIGURE 2