Afore HNS3000TL Manuel de l'utilisateur Installation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur Installation pour {nom_de_la_catégorie} Afore HNS3000TL. Afore HNS3000TL 17 pages. Pv inverter single mppt

Imprimer la page

5.3.1 Conditions for the DC Connection

• The connected PV modules must meet the following requirements

– Same type

– Same number

– Identical alignment

– Identical tilt

• The following limit values at the DC input of the inverter must not be exceeded

(connecting to a higher voltage will destroy the device):

Anyhome

Maximum input voltage Maximum input current

HNS3000TL 550V

5.3.2 Assembling the DC Plug Connector

In order to connect to the inverter, all connection cables of the PV modules must be

equipped with the DC plug connectors provided. You will find the necessary DC plug

connector for DC connection in the delivery.

To assemble the DC plug connectors, proceed as detailed below. Ensure the plug

connectors have the correct polarity. The whole connector will include the male side

and female side as showed below.

Male side connector(M)

Female side connector(F)

Assembly Instructions:

Adjust the striper stopper and put the cable in corresponding notch to strip the

length of 12mm. Please refer to the following figures.

17.5A

10 / 15