Adexa UC200-2036D Manuel d'installation / Manuel d'utilisation et d'entretien - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel d'installation / Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Adexa UC200-2036D. Adexa UC200-2036D 20 pages. Under-mount hood
Imprimer la pageINSTALLATION
(continued)
2-2. Draw electrical wires through cabinet access opening on back of the range hood (refer to
center the hood beneath the cabinet and flush with the front of the cabinet.
3-2. From inside the hood, place hood mounting screws in the exact center of each knockout
secure to the cabinet bottom. Tighten all screws until secure. Be careful when using electrical
screwdriver in order not to damage the range hood. Connect and secure the metal duct (refer to
figure 7).
6
Figure
Step 2:
For safety purpose, pre-drilled mounting holes are provided through the back of the hood. For a more
secure installation, use as many mounting holes as needed to secure from the inside of hood.
Step 3:
Angle filter and direct tab inserts toward the aft slot of the range hood opening. While continuing to install the
filter, ensure you lift the lever for the retractable tabs to clear way for flush insertion. When filter sits flush within
the opening, release the lever to lock in place(refer figure 8).
8
Figure
Step 4:
Turn power ON in control panel. Check all lights and fan operations.
7
Figure
Retractable Tabs
Lift Lever
Tab Inserts
13
figure 6),
holes and