Adexa UC200-2036D 설치 설명서/사용 및 관리 설명서 - 페이지 13

{카테고리_이름} Adexa UC200-2036D에 대한 설치 설명서/사용 및 관리 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Adexa UC200-2036D 20 페이지. Under-mount hood

INSTALLATION

(continued)

2-2. Draw electrical wires through cabinet access opening on back of the range hood (refer to

center the hood beneath the cabinet and flush with the front of the cabinet.

3-2. From inside the hood, place hood mounting screws in the exact center of each knockout

secure to the cabinet bottom. Tighten all screws until secure. Be careful when using electrical

screwdriver in order not to damage the range hood. Connect and secure the metal duct (refer to

figure 7).

Figure

Step 2:

For safety purpose, pre-drilled mounting holes are provided through the back of the hood. For a more

secure installation, use as many mounting holes as needed to secure from the inside of hood.

Step 3:

Angle filter and direct tab inserts toward the aft slot of the range hood opening. While continuing to install the

filter, ensure you lift the lever for the retractable tabs to clear way for flush insertion. When filter sits flush within

the opening, release the lever to lock in place(refer figure 8).

Figure

Step 4:

Turn power ON in control panel. Check all lights and fan operations.

Figure

Retractable Tabs

Lift Lever

Tab Inserts

figure 6),

holes and