Bristan IRBS1-CP Instructions d'installation et manuel d'utilisation - Page 11
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel d'utilisation pour {nom_de_la_catégorie} Bristan IRBS1-CP. Bristan IRBS1-CP 20 pages. Infrared automatic basin spouts
Imprimer la page
Installation
IRWS1-CP
1. Fit The Spout
Create a 27-30mm hole in the wall
surface. Thread the sensor cable and
hose through the hole along with the
threaded tail.
Important: It is advised
to install the spout to a
partition/false wall to
ensure access is
available for future
maintenance.
Also ensure that the product is at least
360mm away from reflective surfaces
to prevent the tap from automatically
switching on and off.
2. Secure Spout To Wall
Secure the Spout in place by screwing
the backnut onto the threaded tail and
tighten fully.
Note: A suitable spanner maybe
required to fully tighten the backnut.
3. Connect Sensor Cable
Go to the 'Electrical Connections'
section.
4. Connect Water Supplies
Go to the 'Water Connections' section.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
Backnut
Inlet Water
Hose
Sensor
Cable
11