Bristan IRBS1-CP Instructions d'installation et manuel d'utilisation - Page 13
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel d'utilisation pour {nom_de_la_catégorie} Bristan IRBS1-CP. Bristan IRBS1-CP 20 pages. Infrared automatic basin spouts
Imprimer la page
Installation - Electrical Connections
1. Position Power Supply Box
Position the power supply box onto the
wall surface below the sink/work surface
where it is easily accessible.
Note: Ensure that the power supply box
is fitted the correct way up (see opposite)
and that the flexible hose will reach from
the underside of the spout to the power
supply box.
Using suitable fixings for the wall type
secure the power supply box to the wall.
2. Connect Power Supply Cable
Before starting any electrical work ensure
the power supply is isolated. Wire the
electrical power cable into a switched
fused spur off the ring main.
The blue wire should be wired to the
neutral connection and the brown
wire should be connected to the live
connection.
Note: For full electrical requirements see
'Electrical Connections' in 'Installation
Requirements' section on page 9.
Important: The power
supply box must be
permanently connected
to the fixed wiring of the
mains supply using the factory supplied
power cable.
3. Plug In Power Cable
Plug the power cable into the power
supply box.
4. Connect The Sensor Cable
Plug the sensor cable from the spout
into the power supply box to activate the
infrared sensor.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
This way up
Important:
The power
supply box must
be installed this
way up.
Inlet
13