Bristan Pisa series Instructions d'installation et manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel de l'utilisateur pour {nom_de_la_catégorie} Bristan Pisa series. Bristan Pisa series 12 pages.
Imprimer la page
1. Safety Note
Please read these instruction thoroughly and retain for future use. All products manufactured
and supplied by Bristan are safe provided they are installed correctly, used correctly and receive
regular maintenance in accordance with these instructions.
These fittings need to be installed in accordance with and meet the requirements of the Water
Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.
2. Specification
Operating pressure range (bar)
Basin Taps
Bath Taps
Small Basin Mixer
Basin Mixer
Bath Filler
Bath Shower Mixer
Maximum static pressure – 10.0 bar
NOTE:- Nominally equal (balanced) inlet supply pressures are recommended for optimum
performance.
Designed to comply with BS EN 200 for single taps/ combination taps for water systems of type 1
and 2 general technical specifications and to be used within systems designed to BS 6700.
BS 6700 recommends the temperature of stored water should never exceed 65°C. A stored water
temperature of 60°C is considered sufficient to meet all nominal requirements and will minimise
the build up of lime scale in hard water areas.
Before starting any installation please consider the following:
Prior to drilling into walls, check that there are no hidden
electrical wires, cables or water supply pipes. This can be
checked with the aid of an electronic detector.
If power tools are used do not forget to:
- Wear eye protection
- Unplug equipment after use
Min.
0.2
0.2
0.2
0.2
0.2
0.2
Max.
7.0
7.0
7.0
7.0
7.0
7.0
03