Bristan Pisa series Instructions d'installation et manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel de l'utilisateur pour {nom_de_la_catégorie} Bristan Pisa series. Bristan Pisa series 12 pages.
Imprimer la page
5. Installation Bath Shower Mixer
1.
Identify all components are present prior to installation.
2.
Install the mixer body to the bath using the backnuts (11) and washers (10) provided under
the bath with washers (9) and the plinth (8) above.
3.
Fit the hose to the mixer, underneath the centre of the tap to hose outlet.
4.
Fix the wall bracket (13) to the wall ensuring that the handset (15) and hose (14) will reach
it.
5.
Connect the hot and cold water supplies and turn water supplies on.
6.
Fully open the valves by turning handles, letting it run for a few minutes to check for leaks.
7.
Operate the mixer in both bath and shower mode. To switch from bath to shower mode, pull
the diverter knob up. To revert back to bath fill mode push the diverter down.
1. Cap
2. Grub Screw
3. Handle
4. Spline Adaptor
5. Valves
6. Body
7. Inlet Connections
8. Plinth
9. Washer
10. Washer
11. Backnut
12. Diverter Knob
13. Wall Bracket
14. Hose
15. Handset
16. Flow Straightener
1
2
5
(x2)
(x2)
(x2)
(x2)
6
(x2)
(x1)
(x2)
(x2)
(x2)
(x2)
7
(x2)
(x1)
(x1)
8
(x1)
(x1)
(x1)
10
3
4
12
9
11
15
16
14
13
09