Bristan IRSD1-BZ Instructions d'installation et manuel d'utilisation - Page 8
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel d'utilisation pour {nom_de_la_catégorie} Bristan IRSD1-BZ. Bristan IRSD1-BZ 16 pages. Infrared automatic soap dispensor
Également pour Bristan IRSD1-BZ : Instructions d'installation et manuel d'utilisation (16 pages)
Imprimer la page
Installation
7. Connect Power Supply Cable
Before starting any electrical work
ensure the power supply is isolated.
Wire the electrical power cable into a
switched fused spur off the ring main.
The blue wire should be wired to the
neutral connection and the brown
wire should be connected to the live
connection.
Note: For full electrical requirements
see 'Electrical Connections' in
'Installation Requirements' section on
page 5.
Important: The power lead must
be permanently connected to the
fixed wiring of the mains supply using
the factory supplied power cable.
Plug the power cable into the power
cable on the pump.
8. Inserting Batteries
Remove the battery cover by
loosening the screw in the top of the
cover.
Insert 4 x AA batteries into the
battery box ensuring they are
inserted the correct way.
Note: Only use 1.5V AA (LR6)
Alkaline batteries (preferably =>
2000mAh for good battery life).
Replace the battery box cover and
tighten the screw. Insert the battery
box into the holder.
Push the holder into the battery box
wall bracket.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
8
Battery
Case