Bristan IRSD1-BZ 설치 지침 및 사용자 설명서 - 페이지 8

{카테고리_이름} Bristan IRSD1-BZ에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan IRSD1-BZ 16 페이지. Infrared automatic soap dispensor
Bristan IRSD1-BZ에 대해서도 마찬가지입니다: 설치 지침 및 사용자 설명서 (16 페이지)

페이지 인쇄

Installation

7. Connect Power Supply Cable

Before starting any electrical work

ensure the power supply is isolated.

Wire the electrical power cable into a

switched fused spur off the ring main.

The blue wire should be wired to the

neutral connection and the brown

wire should be connected to the live

connection.

Note: For full electrical requirements

see 'Electrical Connections' in

'Installation Requirements' section on

page 5.

Important: The power lead must

be permanently connected to the

fixed wiring of the mains supply using

the factory supplied power cable.

Plug the power cable into the power

cable on the pump.

8. Inserting Batteries

Remove the battery cover by

loosening the screw in the top of the

cover.

Insert 4 x AA batteries into the

battery box ensuring they are

inserted the correct way.

Note: Only use 1.5V AA (LR6)

Alkaline batteries (preferably =>

2000mAh for good battery life).

Replace the battery box cover and

tighten the screw. Insert the battery

box into the holder.

Push the holder into the battery box

wall bracket.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Battery

Case