Bristan IRSD1-BZ 설치 지침 및 사용자 설명서 - 페이지 6

{카테고리_이름} Bristan IRSD1-BZ에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan IRSD1-BZ 16 페이지. Infrared automatic soap dispensor
Bristan IRSD1-BZ에 대해서도 마찬가지입니다: 설치 지침 및 사용자 설명서 (16 페이지)

페이지 인쇄

Installation

1. Fit The Spout

Fit the spout to the sink / basin

ensuring the dispensing cable and

sensor cable are threaded through

the hole in the sink / basin.

2. Secure Spout to Sink / Basin

Screw the metal backnut onto

the thread of the spout upto the

underside of the sink / basin.

Tighten backnut using a suitable

spanner.

3. Fit Wall Brackets

Position the brackets onto the wall

surface and mark the position of the

fixing holes.

Remove the brackets and drill

suitable holes for the wall plugs

supplied.

Before drilling into walls, check that

there are no hidden electrical wires,

cables or water supply pipes. This

can be checked with the aid of

an electrical detector:

If power tools are used do not forget

to:

- Wear eye protection

- Unplug equipment after use

Fit the wall plugs and position the

brackets into position and secure

using the screws provided.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Battery

Wall

Bracket

Dispenser &

Sensor cables

Bottle Wall

Bracket