Gamma 6004 Manuel du propriétaire - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Gamma 6004. Gamma 6004 20 pages. 6 point mounting
Également pour Gamma 6004 : Manuel du propriétaire (20 pages), Manuel du propriétaire (20 pages), Manuel du propriétaire (19 pages)

Imprimer la page

ASSEMBLY INSTRUCTIONS

MOUNTING THE FRAME

Height Adjustment

The turntable height can be adjusted to suit

the stringer. To adjust, loosen the two set

screws on the lower column support post

below the bellows assembly. Adjust the

amount of engagement between the upper

and lower column supports until the desired

height is attained. Make sure that the tension

track is still aligned with the long leg of the

base and tighten the two set screws to lock

the upper support column into place.

Frame Support Post Adjustment

Place the racquet frame over the center

support slide. Screw the post outward until

the center support of the racquet support

slide is positioned on the inside surface of

the racquet frame.

Securing the Shoulder Supports

Secure the racquet frame with the shoulder

supports by rotating the large adjustment

knobs on the outside of the support post as-

semblies clockwise. Adjust the supports until

firm contact is made between the shoulder

supports and the frame.

The tear drop shaped holes towards the back

of the shoulder supports are handy for holding

the loose end of the string while pulling the

string through the racquet. Simply insert the

loose end into the tear drop shaped holes

and slide the string into the point of the hole.