Gamma 6004 Kullanıcı El Kitabı - Sayfa 8
Tel Çekme Makineleri Gamma 6004 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Gamma 6004 20 sayfaları. 6 point mounting
Ayrıca Gamma 6004 için: Kullanıcı El Kitabı (20 sayfalar), Kullanıcı El Kitabı (20 sayfalar), Kullanıcı El Kitabı (19 sayfalar)
ASSEMBLY INSTRUCTIONS
MOUNTING THE FRAME
Height Adjustment
The turntable height can be adjusted to suit
the stringer. To adjust, loosen the two set
screws on the lower column support post
below the bellows assembly. Adjust the
amount of engagement between the upper
and lower column supports until the desired
height is attained. Make sure that the tension
track is still aligned with the long leg of the
base and tighten the two set screws to lock
the upper support column into place.
Frame Support Post Adjustment
Place the racquet frame over the center
support slide. Screw the post outward until
the center support of the racquet support
slide is positioned on the inside surface of
the racquet frame.
Securing the Shoulder Supports
Secure the racquet frame with the shoulder
supports by rotating the large adjustment
knobs on the outside of the support post as-
semblies clockwise. Adjust the supports until
firm contact is made between the shoulder
supports and the frame.
The tear drop shaped holes towards the back
of the shoulder supports are handy for holding
the loose end of the string while pulling the
string through the racquet. Simply insert the
loose end into the tear drop shaped holes
and slide the string into the point of the hole.
8