Gamma PROGRESSION 600ES-LED Manuel du propriétaire - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Gamma PROGRESSION 600ES-LED. Gamma PROGRESSION 600ES-LED 17 pages.
Imprimer la page
ASSEMBLY INSTRUCTIONS
Installing the Turntable
The turntable is located under the foam pack-
ing in the bottom of the shipping carton.
Insert the center post of the turntable into the
bushing of the stringing machine base.
Installing the Frame Support Posts
The GAMMA 600ES support post assem-
blies are precision aligned at the factory and
are marked for proper installation on the
turntable.
Install the support post with the dot on its
base to an identical dot on the turntable. Align
the threaded hole in the bottom of the frame
support post with the slot in the turntable.
Screw the lever lock bolt with washer into the
bottom of the support post and tighten
gently.Position the washer the rounded edge
toward the turntable.
Repeat procedure on the opposite side of the
turntable.
Fixed Clamp Installation
To install the clamps, remove the winged
lock knob to separate the knob from the lower
guide bushing. Be careful not to lose the
radial thrust bearing components located in
the center recess of the knob.
Align the clamp base with the clamp slot of
the turntable base. Insert the clamp guide
bushing into the clamp from the bottom of the
turntable making sure to engage the guide
with the clamp slot.
3