Gamma PROGRESSION 600ES-LED 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Gamma PROGRESSION 600ES-LED에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma PROGRESSION 600ES-LED 17 페이지.

ASSEMBLY INSTRUCTIONS

Installing the Turntable

The turntable is located under the foam pack-

ing in the bottom of the shipping carton.

Insert the center post of the turntable into the

bushing of the stringing machine base.

Installing the Frame Support Posts

The GAMMA 600ES support post assem-

blies are precision aligned at the factory and

are marked for proper installation on the

turntable.

Install the support post with the dot on its

base to an identical dot on the turntable. Align

the threaded hole in the bottom of the frame

support post with the slot in the turntable.

Screw the lever lock bolt with washer into the

bottom of the support post and tighten

gently.Position the washer the rounded edge

toward the turntable.

Repeat procedure on the opposite side of the

turntable.

Fixed Clamp Installation

To install the clamps, remove the winged

lock knob to separate the knob from the lower

guide bushing. Be careful not to lose the

radial thrust bearing components located in

the center recess of the knob.

Align the clamp base with the clamp slot of

the turntable base. Insert the clamp guide

bushing into the clamp from the bottom of the

turntable making sure to engage the guide

with the clamp slot.