Gamma Ballhopper Rollerhopper 150 Manuel

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Gamma Ballhopper Rollerhopper 150. Gamma Ballhopper Rollerhopper 150 3 pages.

Imprimer la page

PACKAGE CONTENTS

1 - Ballhopper Rollerhopper 150

HANDLE ASSEMBLY

Step 1: Grab the ring of the Handle

Block Pin, pull away from the

Handle/Leg, turn 90 degrees and

release the ring into the groove that

holds the pin in the out locked

position. Repeat for the other side.

BALL PICK UP

Step 1: Make sure the Yoke Spring Pin

is disengaged from the Wheel hole.

Made in Taiwan

Step 2: Insert Handle/Leg into the

Yoke, pull the Handle Block Pin ring

away from the Handle, turn 90

degrees and release the pin until it

locks into the Yoke. Repeat for the

other side.

Step 2: Push the Rollerhopper

forward over loose tennis balls.

Ballhopper

Rollerhopper

NOTE: To remove the Handle/Leg for

transport or storage, reverse

Steps 1 and 2.

150

™

Updated 03.29.12