Gamma Ballhopper Rollerhopper 150 Руководство
Просмотреть онлайн или скачать pdf Руководство для Аксессуары Gamma Ballhopper Rollerhopper 150. Gamma Ballhopper Rollerhopper 150 3 страницы.
Печатать страницуPACKAGE CONTENTS
1 - Ballhopper Rollerhopper 150
HANDLE ASSEMBLY
Step 1: Grab the ring of the Handle
Block Pin, pull away from the
Handle/Leg, turn 90 degrees and
release the ring into the groove that
holds the pin in the out locked
position. Repeat for the other side.
BALL PICK UP
Step 1: Make sure the Yoke Spring Pin
is disengaged from the Wheel hole.
Made in Taiwan
GAMMA | 200 Waterfront Drive | Pittsburgh, PA 15222-4750 | O: 412.323.0335 | F: 412.323.0317 | GAMMASports.com | Facebook/Twitter: GAMMATennis
Step 2: Insert Handle/Leg into the
Yoke, pull the Handle Block Pin ring
away from the Handle, turn 90
degrees and release the pin until it
locks into the Yoke. Repeat for the
other side.
Step 2: Push the Rollerhopper
forward over loose tennis balls.
Ballhopper
Rollerhopper
®
NOTE: To remove the Handle/Leg for
transport or storage, reverse
Steps 1 and 2.
150
™
Updated 03.29.12