Jam HMDX Jam Fusion Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Jam HMDX Jam Fusion. Jam HMDX Jam Fusion 6 pages. Wireless stereo headphones
Imprimer la page
Pairing 2 Jam Fusion Headphones
1. Pair one headphone to your device by following the single
pairing instructions.
2. Move the Jam
2
pairing switch to the Jam
headphone (see Fig. 3).
3. On the second headphone, move Jam
position and power on.
4. The Bluetooth
®
indicator light will flash quickly until the units are
paired. Once paired you will hear a hint tone and the Bluetooth
indicator will slowly flash blue.
NOTE: Jam
2
indicator will flash white when successfully paired.
Listening to your device through Auxiliary Line-In Audio Jack
1. Connect AUX cable to the headphone or line-out jack of an audio device
and plug the other end of the cable into the line-in audio jack on the unit.
2. Press PLAY on device and use device controls to adjust volume or
FWD/RVS tracks.
FIG. 3
2
position on first
2
switch to the Jam
2
®
NOTE:
• Auxiliary line-in is a passive feature and does not require the power to be on.
• When listening through auxiliary line-in, the controls on the Fusion are disabled,
always use the controls on your device.
Built-In Speakerphone
The Jam Fusion is equipped with a built-in speakerphone, for easy hands free talking:
1. Make sure the Jam Fusion has been successfully paired with your device.
2. To answer a call, simply press any button when you hear a ringtone.
3. To end call, press any button except +/- Volume buttons.
NOTE:
• When an incoming or outgoing call is detected, the Fusion will pause the music
and a ringtone will sound. After the call is terminated, the music will resume to
play automatically where it left off.
• When making a call, use your phone to dial.
• To refuse an incoming call press and hold any button for 3 seconds.
• If the Jam Fusion is connected to the AUX cable when an incoming call is
detected, use your phone to answer or refuse the call