Jam HMDX Jam Fusion Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Słuchawki Jam HMDX Jam Fusion. Jam HMDX Jam Fusion 6 stron. Wireless stereo headphones

Pairing 2 Jam Fusion Headphones

1. Pair one headphone to your device by following the single

pairing instructions.

2. Move the Jam

pairing switch to the Jam

headphone (see Fig. 3).

3. On the second headphone, move Jam

position and power on.

4. The Bluetooth

indicator light will flash quickly until the units are

paired. Once paired you will hear a hint tone and the Bluetooth

indicator will slowly flash blue.

NOTE: Jam

indicator will flash white when successfully paired.

Listening to your device through Auxiliary Line-In Audio Jack

1. Connect AUX cable to the headphone or line-out jack of an audio device

and plug the other end of the cable into the line-in audio jack on the unit.

2. Press PLAY on device and use device controls to adjust volume or

FWD/RVS tracks.

FIG. 3

position on first

switch to the Jam

NOTE:

• Auxiliary line-in is a passive feature and does not require the power to be on.

• When listening through auxiliary line-in, the controls on the Fusion are disabled,

always use the controls on your device.

Built-In Speakerphone

The Jam Fusion is equipped with a built-in speakerphone, for easy hands free talking:

1. Make sure the Jam Fusion has been successfully paired with your device.

2. To answer a call, simply press any button when you hear a ringtone.

3. To end call, press any button except +/- Volume buttons.

NOTE:

• When an incoming or outgoing call is detected, the Fusion will pause the music

and a ringtone will sound. After the call is terminated, the music will resume to

play automatically where it left off.

• When making a call, use your phone to dial.

• To refuse an incoming call press and hold any button for 3 seconds.

• If the Jam Fusion is connected to the AUX cable when an incoming call is

detected, use your phone to answer or refuse the call