Deco Style PRG500J Manuel - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Deco Style PRG500J. Deco Style PRG500J 20 pages. 500w paint sprayer with spray shelter
Imprimer la page
7. ASSEMBLY
NOTE: Before using the tool, read the instruction
book carefully.
PREPARATION
To obtain the best results, it is important that you prepare
the paint to be sprayed and thin the paint to the correct
viscosity. Before operating, always ensure that the paints to
be sprayed are free from dust, dirt and grease. The paint or
fluid to be sprayed should be thoroughly mixed and free from
lumps or other particles. Many substances can be sprayed
with your spray gun, but always check the manufacturer's
recommendations before purchasing your paint.
7.1 Viscosity measurement
Most paints are supplied ready for brush application and
will need to be thinned before they are suitable to be
sprayed. Follow the manufacturer's advice on thinning
the paint when used with a spray gun. The viscosity cup
(11) will help you to determine the correct viscosity of
paint to be used.
To determine the correct viscosity (See Fig. 1)
1) Stir the paint well before starting to measure.
2) Fill the viscosity cup (11) to the brim with paint.
3) Measure the time in seconds of the liquid dripping
from the cup into the can until the cup is empty. The
measured time is called run-DIN-seconds (DIN-s).
WARNING! Dilute the paint before use. Get the
information of dilution and viscosity of the paint
from the store that sold the paint.
WARNING! This viscosity cup is only used for
measuring paint viscosity. It is not a funnel, paint
storage or paint transporter.
WARNING! When spraying paint, use the
recommended viscosity. Spray the paint slowly and
evenly. Spraying too fast or too large flow may result in
paint dropped or spilt.
AFTER SALES SUPPORT:
1300 889 028
AUS
9
MODEL: PRG500J PRODUCT CODE: 10562 09/2019
Fig.1