Deco Style PRG500J Manuale - Pagina 9

Sfoglia online o scarica il pdf Manuale per Spruzzatore di vernice Deco Style PRG500J. Deco Style PRG500J 20. 500w paint sprayer with spray shelter

7. ASSEMBLY

NOTE: Before using the tool, read the instruction

book carefully.

PREPARATION

To obtain the best results, it is important that you prepare

the paint to be sprayed and thin the paint to the correct

viscosity. Before operating, always ensure that the paints to

be sprayed are free from dust, dirt and grease. The paint or

fluid to be sprayed should be thoroughly mixed and free from

lumps or other particles. Many substances can be sprayed

with your spray gun, but always check the manufacturer's

recommendations before purchasing your paint.

7.1 Viscosity measurement

Most paints are supplied ready for brush application and

will need to be thinned before they are suitable to be

sprayed. Follow the manufacturer's advice on thinning

the paint when used with a spray gun. The viscosity cup

(11) will help you to determine the correct viscosity of

paint to be used.

To determine the correct viscosity (See Fig. 1)

1) Stir the paint well before starting to measure.

2) Fill the viscosity cup (11) to the brim with paint.

3) Measure the time in seconds of the liquid dripping

from the cup into the can until the cup is empty. The

measured time is called run-DIN-seconds (DIN-s).

WARNING! Dilute the paint before use. Get the

information of dilution and viscosity of the paint

from the store that sold the paint.

WARNING! This viscosity cup is only used for

measuring paint viscosity. It is not a funnel, paint

storage or paint transporter.

WARNING! When spraying paint, use the

recommended viscosity. Spray the paint slowly and

evenly. Spraying too fast or too large flow may result in

paint dropped or spilt.

AFTER SALES SUPPORT:

1300 889 028

AUS

MODEL: PRG500J PRODUCT CODE: 10562 09/2019

Fig.1