IKEA 302-371-38 Manuel - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} IKEA 302-371-38. IKEA 302-371-38 44 pages.
Également pour IKEA 302-371-38 : Manuel (44 pages)

Imprimer la page

ENGLISH

Problem

The residual heat indicator is

not displaying anything.

There is no signal when you

touch the panel sensor fields.

lights up on the heat set-

ting display.

symbol plus a number

appears on the heat setting

display.

lights up on the heat

setting display.

If there is a fault, first try to find a solution to

the problem yourself. If you cannot find a

solution to the problem yourself, contact

your dealer or the After Sales Service.

Possible cause

The cooking zone was only

on for a short time and is

therefore not hot.

The signals are deactivated. Activate the signals. Refer to

Unsuitable cookware.

No cookware on the cooking

zone.

The diameter of the bottom

of the cookware is too small

for the cooking zone.

Electronics fault.

Overheating protection for

the cooking zone operates.

Remedy

If the cooking zone is sup-

posed to be hot, call the Af-

ter Sales Service.

OffSound Control.

Use suitable cookware.

Place cookware on the cook-

ing zone.

Move onto a smaller cooking

zone.

Disconnect the appliance

from the electrical supply for

a few minutes. Take the fuse

out of the house's electric

system. If after switching on

again,

is displayed

again, call the After Sales

Service.

Switch off the appliance. Re-

move the hot cookware. Af-

ter approximately 30 sec-

onds switch on the cooking

zone again.

should dis-

appear, residual heat indi-

cator can stay. Cool down

the cookware and check it

with the section "Cookware

for the induction cooking

zones".