IKEA KULINARISK Manuel de démarrage rapide - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} IKEA KULINARISK. IKEA KULINARISK 16 pages. Oven with steam feature
Également pour IKEA KULINARISK : Manuel d'instruction (20 pages), Manuel de l'utilisateur (36 pages), Manuel de l'utilisateur (16 pages), Manuel de l'utilisateur (36 pages), Manuel de l'utilisateur (32 pages), Manuel (36 pages), Manuel d'instruction (48 pages), Manuel d'instructions (36 pages), Manuel (24 pages), Manuel d'instructions d'installation (36 pages), Manuel (20 pages), Manuel (44 pages), Manuel de l'utilisateur (36 pages), Manuel (40 pages), Manuel (40 pages), Manuel de l'utilisateur (20 pages), Manuel (37 pages), Manuel (32 pages), Manuel (20 pages), Manuel (20 pages), Manuel (36 pages), Manuel (21 pages), Manuel de démarrage rapide (8 pages), Manuel (40 pages), Manuel (20 pages), Manuel (32 pages), Manuel (36 pages), Manuel (17 pages)

Imprimer la page
IKEA KULINARISK Manuel de démarrage rapide
ENGLISH
ducts carrying combustion
fumes (boilers, fireplaces,
etc.).
• If the extractor is used
in conjunction with non-
electrical appliances (e.g.
gas burning appliances),
a sufficient degree
of aeration must be
guaranteed in the room
in order to prevent the
backflow of exhaust gas.
When the cooker hood is
used in conjunction with
appliances supplied with
energy other than electric,
the negative pressure in
the room must not exceed
0,04 mbar to prevent
fumes being drawn back
into the room by the
cooker hood.
• The air must not be
discharged into a flue that
is used for exhausting
fumes from appliances
burning gas or other fuels.
• If the supply cord is
damaged, it must be
replaced from the
manufacturer or its service
agent.
• Connect the plug to a
socket complying with
current regulations,
located in an accessible
place.
• With regards to the
technical and safety
measures to be adopted
for fume discharging it is
importat to closely follow
the regulations provided
by the local authorities.
WARNING: Before
installing the Hood,
remove the protective
films.
• Use only screws and small
parts in support of the
hood.
WARNING: Failure
to install the screws
or fixing device in
accordance with these
instructions may result
in electrical hazards.
• Connect the hood to the
power net by using a
bipolar switch having a
contact gap of at least 3
mm.
• Do not look directly at
the light through optical
devices (binoculars,
8