IKEA KULINARISK Manuale di avvio rapido - Pagina 8

Sfoglia online o scarica il pdf Manuale di avvio rapido per Piano cottura IKEA KULINARISK. IKEA KULINARISK 16. Oven with steam feature
Anche per IKEA KULINARISK: Manuale di istruzioni (20 pagine), Manuale d'uso (36 pagine), Manuale d'uso (16 pagine), Manuale d'uso (36 pagine), Manuale d'uso (32 pagine), Manuale (36 pagine), Manuale di istruzioni (48 pagine), Manuale di istruzioni (36 pagine), Manuale (24 pagine), Manuale di istruzioni per l'installazione (36 pagine), Manuale (20 pagine), Manuale (44 pagine), Manuale d'uso (36 pagine), Manuale (40 pagine), Manuale (40 pagine), Manuale d'uso (20 pagine), Manuale (37 pagine), Manuale (32 pagine), Manuale (20 pagine), Manuale (20 pagine), Manuale (36 pagine), Manuale (21 pagine), Manuale di avvio rapido (8 pagine), Manuale (40 pagine), Manuale (20 pagine), Manuale (32 pagine), Manuale (36 pagine), Manuale (17 pagine)

Stampa la pagina

ENGLISH

ducts carrying combustion

fumes (boilers, fireplaces,

etc.).

• If the extractor is used

in conjunction with non-

electrical appliances (e.g.

gas burning appliances),

a sufficient degree

of aeration must be

guaranteed in the room

in order to prevent the

backflow of exhaust gas.

When the cooker hood is

used in conjunction with

appliances supplied with

energy other than electric,

the negative pressure in

the room must not exceed

0,04 mbar to prevent

fumes being drawn back

into the room by the

cooker hood.

• The air must not be

discharged into a flue that

is used for exhausting

fumes from appliances

burning gas or other fuels.

• If the supply cord is

damaged, it must be

replaced from the

manufacturer or its service

agent.

• Connect the plug to a

socket complying with

current regulations,

located in an accessible

place.

• With regards to the

technical and safety

measures to be adopted

for fume discharging it is

importat to closely follow

the regulations provided

by the local authorities.

WARNING: Before

installing the Hood,

remove the protective

films.

• Use only screws and small

parts in support of the

hood.

WARNING: Failure

to install the screws

or fixing device in

accordance with these

instructions may result

in electrical hazards.

• Connect the hood to the

power net by using a

bipolar switch having a

contact gap of at least 3

mm.

• Do not look directly at

the light through optical

devices (binoculars,