IKEA MATMASSIG Manuel - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} IKEA MATMASSIG. IKEA MATMASSIG 28 pages.
Également pour IKEA MATMASSIG : Manuel (24 pages), Manuel (44 pages), Manuel (44 pages), Manuel (28 pages), Manuel (48 pages), Manuel (36 pages), Manuel (28 pages), Manuel (44 pages), Manuel (29 pages), Manuel (12 pages), Manuel (48 pages)

Imprimer la page

ENGLISH

appliance and the worktop. Do not install

the appliance next to the doors and under

windows. Otherwise, the hot cookware may

fall off the pan supports.

Clearances to combustible surfaces

1 10 mm

130 mm

Adjacent walls, cupboards and protection

for combustible materials: Ensure that the

Electrical connection

Warning! Refer to Safety

chapters.

Connection cable

Caution! Information for

authorised installer only.

Warning!

The appliance must be earthed.

Warning!

Risk of injury from electrical

current.

• The electrical mains terminal is under

voltage.

• Make sure that the electrical mains

terminal is free of voltage.

appliance is installed in accordance with

clauses 6.2.5 and 6.10.1.1 of AS/NZS

5601.1, or clauses 6.9.1 and 6.9.5 of

AS/NZS 5601.2 with regard to clearances

to combustible surfaces and materials, and

clearances to rangehoods and exhaust

fans. To ensure clearances of 200mm from

burners to vertical combustible surfaces

observe the minimum distance requirements

shown in Figure. Clearances to combustible

surfaces wmay be reduced if combustible

surfaces are protected in accordance with

clause 6.10.1.2 of AS/NZS 5601.1, or

clause 6.9.2 of AS/NZS 5601.2

100 mm

• Loose and inappropriate plug and

socket connections. May overheat the

terminal.

• Make sure that the clamping connections

are installed correctly.

• Secure the cable with the strain relief

clamp.

Before connecting, check that the nominal

voltage of the appliance stated on the

rating plate, corresponds to the available

supply voltage. Also, check the power

rating of the appliance and make sure that

the wire is suitably sized to suit the

appliance power rating. Refer to the

Technical data chapter.

For installation into a standard

600mm width benchtop the

clearance specified can not be

achieved and combustible

surfaces must be protected in

accordance with the above

clauses.