IKEA OTROLIG Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} IKEA OTROLIG. IKEA OTROLIG 20 pages.
Également pour IKEA OTROLIG : Manuel (16 pages), Manuel d'assemblage (16 pages), Manuel d'assemblage (16 pages)

Imprimer la page

ENGLISH

Select the cooking zone to be used with the

timer (an illuminated dot appears to the

bottom right hand side of the heat setting

indicator on the display), press the button +

or - button

with the clock symbol then set

the desired cooking time using the buttons

"+" and "-" of the timer function (see figure).

After 3 seconds, the timer begins the

countdown (an illuminated dot is visible next

to the zone for which the timer has been

activated).

Once the set time has elapsed, an acoustic

signal sounds and the cooking zone switches

off automatically.

To deactivate the timer, press the "-" button

until the display shows "0:0" or hold the + or

- button

for at least 3 seconds.

To set the timer for another zone, repeat

the points above. The timer display always

shows the timer for the selected zone or the

shortest timer.

To change or switch off the timer, press

the zone selection button for the timer in

question.

Pause

This function allows you to temporarily

hold and then resume cooking processes

maintaining previous settings). Press the key

flashes on the display in place of

the power levels. To resume cooking, press

the

key

and touch the slider of an

active zone again.

Activation/deactivation of the acoustic

signal

Keep the

(Acoustic signal) button for at

least 3 seconds. To deactivate the function

repeat the same procedure.

Deactivation of cooking zones

Select the cooking zone you wish to switch

off. Press the "0" on the slider area to set the

level to "0".

The cooking zone switches off and the

residual heat indicator "H" lights up.

Flexi mode

This function allows the cooking zone to be

used as two separate zones or as a single

extra large zone.

It is perfect for oval, rectangular and

elongated pans (with maximum base

dimensions of 38x23 cm) or more than one

standard pan in the same time. In order to

activate the flexi mode function, switch on

the hob, press

(Flexi mode) button: the

two cooking zone displays show level "0";

both dots next to the level number are lit,

indicating that the Flexi mode is activated.

To change the power level (from 1 to max.

9 or P) one of the two slider related to Flexi

mode zone. To deactivate the Flexi mode

function, press

(Flexi mode) button.

The message "no pot"

on the display of the zone that is not able to

detect any pot (because of missing pot, or

misplaced or not suitable for induction hob).

This message remains active for 60 seconds:

in this time you can add or slide pots within

the flexi mode area as you prefer.

After 60 seconds if no pan is placed on the

zone, the system stops "searching" pots on

that zone, the symbol

on the display to remind that the zone is

disabled.

To reactivate the Flexi mode function, press

(Flexi mode) button.

The Flexi mode function is also able to

detect when a pot is moved from one zone

to the other one within the flexi mode area

keeping the same power level of the zone

where the pan originally was placed (see

the example in the figure below: if the pot

is moved from the front heater to the rear

heater, the power level will be shown on the

display corresponding to the zone where the

pot is placed).

It is also possible to operate the Flexi mode

area as two independent cooking zones,

using the corresponding button of the single

will appear

remains visible