Bernard Controls BT Manuel de démarrage - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Bernard Controls BT. Bernard Controls BT 12 pages. Separated box

Imprimer la page

5.4 Closing connection compartment or connector



Check that cover seal is clean and well inserted in its groove.

How to close connection compartment or connector

Put back the cover on connection compartment or plug

back the connector on the actuator

With the 10mm angled socket wrench or flat blade

screwdriver, tighten the cover on the housing with its 4

screws.

5.5 Wiring the external ground terminal

The external ground terminal is located at the bottom right of the

actuator connection compartment / connector, in the housing.

How to plug external ground terminal

1. Crimp the end of the

earth cable with a 6mm

stud hole tubular lug.

2. Thread the spring lock

washer then the lug on

the 6 mm screw.

3. Screw this assembly in

the tapered hole with a

10mm eye wrench or

open-end wrench.

LOGIC SETTINGS



For Logic settings, please refer to the BT Start-Up Guide.

English