Bernard Controls BT Manuale di avvio - Pagina 10

Sfoglia online o scarica il pdf Manuale di avvio per Unità di controllo Bernard Controls BT. Bernard Controls BT 12. Separated box

5.4 Closing connection compartment or connector



Check that cover seal is clean and well inserted in its groove.

How to close connection compartment or connector

Put back the cover on connection compartment or plug

back the connector on the actuator

With the 10mm angled socket wrench or flat blade

screwdriver, tighten the cover on the housing with its 4

screws.

The external ground terminal is located at the bottom right of the

actuator connection compartment / connector, in the housing.

How to plug external ground terminal

1. Crimp the end of the

earth cable with a 6mm

stud hole tubular lug.

2. Thread the spring lock

washer then the lug on

the 6 mm screw.

3. Screw this assembly in

the tapered hole with a

10mm eye wrench or

open-end wrench.



For Logic settings, please refer to the BT Start-Up Guide.

English