CeoTronics CT-DECT Base Manuel d'utilisation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} CeoTronics CT-DECT Base. CeoTronics CT-DECT Base 20 pages. Headset for wireless duplex communication
Également pour CeoTronics CT-DECT Base : Manuel d'utilisation (20 pages), Manuel d'utilisation (20 pages), Manuel d'utilisation (14 pages), Manuel d'utilisation (14 pages)

Imprimer la page

3.2

Commissioning

3.2.1 Fasten the CT-DECT Multi (PP) on your clothing

Fasten the CT-DECT Multi at a suitable place on your clothing. Take care that your mobility is not im-

paired and the CT-DECT Multi (PP) can be operated without any problem.

3.2.2 Connect the headset to the CT-DECT Multi (PP)

Put the headset on. Fasten the PTT button of the headset with the clip on its back side at a suitable

place on your clothing. Connect the PTT button with the 6-pin connector through the connecting cable

to the 6-pole jack of the CT-DECT Multi (PP).

3.2.3 Switch on CT-DECT Multi (PP) and CT-DECT Case (8) (FP)

Switch-on, establishing connection, adjusting the volume

PLEASE NOTE:

Applies to CT-DECT Multi (PP) units subscribed to a CT-DECT Case (8) (FP).

a. First switch on the CT-DECT Case (8) (FP). The CT-DECT Case (8) (FP) starts now an initialization

process during which it may not be switched off. After initialization the pilot lamp lights up.

b. Switch on the CT-DECT Multi (PP) units you want to communicate with, using the ON/OFF switch /

volume control. After switch-on you will hear a high beep in the headsets. After this, synchronization,

i.e. the search process, starts between the CT-DECT Case (8) (FP) and the CT-DECT Multi (PP)

units, the duration of which may vary. While this process is under way, a high-low tone sequence will

be heard every second in the CT headsets, indicating, that the CT-DECT Multi (PP) units are seek-

ing their CT-DECT Case (8) (FP).

After successful synchronization - i.e. a CT-DECT Multi (PP) found its CT-DECT Case (8) (FP) - the

high-low tone sequence falls silent and a high double beep is heard in the headset. CT-DECT Case (8)

(FP) and CT-DECT Multi (PP) units establish now automatically the connection between one another.

As soon as the connection is established a final high beep will be heard in the CT headset. This indi-

cates that the units are now ready for duplex communication within the working range between CT-

DECT Multi (PP) and base unit.