CeoTronics CT-DECT Base Manuale di istruzioni per l'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Cuffie CeoTronics CT-DECT Base. CeoTronics CT-DECT Base 20. Headset for wireless duplex communication
Anche per CeoTronics CT-DECT Base: Manuale di istruzioni per l'uso (20 pagine), Manuale di istruzioni per l'uso (20 pagine), Manuale di istruzioni per l'uso (14 pagine), Manuale di istruzioni per l'uso (14 pagine)

3.2

Commissioning

Fasten the CT-DECT Multi at a suitable place on your clothing. Take care that your mobility is not im-

paired and the CT-DECT Multi (PP) can be operated without any problem.

Put the headset on. Fasten the PTT button of the headset with the clip on its back side at a suitable

place on your clothing. Connect the PTT button with the 6-pin connector through the connecting cable

to the 6-pole jack of the CT-DECT Multi (PP).

Switch-on, establishing connection, adjusting the volume

PLEASE NOTE:

Applies to CT-DECT Multi (PP) units subscribed to a CT-DECT Case (8) (FP).

a. First switch on the CT-DECT Case (8) (FP). The CT-DECT Case (8) (FP) starts now an initialization

process during which it may not be switched off. After initialization the pilot lamp lights up.

b. Switch on the CT-DECT Multi (PP) units you want to communicate with, using the ON/OFF switch /

volume control. After switch-on you will hear a high beep in the headsets. After this, synchronization,

i.e. the search process, starts between the CT-DECT Case (8) (FP) and the CT-DECT Multi (PP)

units, the duration of which may vary. While this process is under way, a high-low tone sequence will

be heard every second in the CT headsets, indicating, that the CT-DECT Multi (PP) units are seek-

ing their CT-DECT Case (8) (FP).

After successful synchronization - i.e. a CT-DECT Multi (PP) found its CT-DECT Case (8) (FP) - the

high-low tone sequence falls silent and a high double beep is heard in the headset. CT-DECT Case (8)

(FP) and CT-DECT Multi (PP) units establish now automatically the connection between one another.

As soon as the connection is established a final high beep will be heard in the CT headset. This indi-

cates that the units are now ready for duplex communication within the working range between CT-

DECT Multi (PP) and base unit.