BRITAX RÖMER DUALFIX PRO Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} BRITAX RÖMER DUALFIX PRO. BRITAX RÖMER DUALFIX PRO 19 pages.

Imprimer la page

2. Place the child seat on the selected car seat.

3. Fold the support leg 1 completely away from the child

seat.

4.1.4

Fastening the ISOFIX

ISOFIX locking arms

Release button

1. Press the locking button 4 and the release button 2 to-

gether and slide the ISOFIX locking arm 1 out as far as

possible.

P The ISOFIX locking arm 1 audibly locks in place.

2. Slide out the second ISOFIX locking arm 1 as far as

possible, as well.

P The second ISOFIX locking arm 1 audibly locks in

place.

P Both ISOFIX locking arms 1 are extended to the maxi-

mum.

3. Connect the ISOFIX locking arms 1 to the ISOFIX in-

stallation bracket on the car seat.

P Both ISOFIX locking arms 1 audibly lock in place.

P Both ISOFIX indicators 3 are green.

IP10165 | 1.5 | 2000038331

ISOFIX indicator

Fastening button

DUALFIX PRO | BRITAX RÖMER

WARNING Risk of injury from unsecured child seat.

Make sure that both ISOFIX locking arms are fully

locked in place. Both ISOFIX indicators must be green.

4. Clamp the ISOFIX connection by forcefully pushing the

child seat into the backrest of the car seat.

INFO Clamping the child seat into the car seat reduces

the amount of horizontal movement of the child seat.

The smaller the possible movement, the better the child

will be protected.

5. Increase the tension of the ISOFIX connection by force-

fully pushing forwards on the base station.

INFO We recommend pushing the base station left and

right.

6. Check that the ISOFIX locking arms 1 are both retract-

ed to the same distance.

The positions of the ISOFIX locking arms are

shown on the product using numbers. These num-

bers are located above the ISOFIX indicators. Both

ISOFIX indicators must show the same number.

7. Check that the ISOFIX locking arms 1 are connected

to the ISOFIX installation brackets on both sides by

pulling at the child seat.

P If neither of the ISOFIX locking arms 1 comes loose,

they are both connected to the vehicle.

4.1.5

Setting support leg

Support leg

Rotation indicator

1. Make sure that the support leg 1 is still folded out.

P The red rotation indicator 2 is not visible.

2. Keep holding the adjustment button 3 depressed.

3. Extend the support leg 1 to the floor of the vehicle.

4. Release the adjustment button 3.

Adjustment button

Support indicator