BRITAX RÖMER DUALFIX PRO Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} BRITAX RÖMER DUALFIX PRO. BRITAX RÖMER DUALFIX PRO 19 pages.
Imprimer la pageP The adjustment button 3 audibly locks in place.
P The protection indicator 4 is green.
P The bottom of the child seat is on the seat of the car
seat.
WARNING Risk of injury if the support leg is not sta-
ble. Never place objects underneath the support leg.
Make sure that the support leg is standing stably on the
floor of the vehicle.
5. Make sure that the support leg 1 does not raise the
bottom of the child seat from the surface of the car
seat.
4.2
Loosen child seat
Risk of injury from unsecured objects
In the case of an emergency stop or accident, the unse-
cured child seat may cause injury to other occupants in
the vehicle.
Ensure that the child seat product is always secured
u
when it is in the vehicle, even if no child is being
transported.
1
Adjustment button
2
Support leg
3
ISOFIX locking arms
1. Keep holding the adjustment button 1 depressed.
2. Slide the lower section of the support leg 2 into the up-
per section.
IP10165 | 1.5 | 2000038331
WARNING
4
Release button
5
Fastening button
DUALFIX PRO | BRITAX RÖMER
3. Release the adjustment button 1.
P The support leg 2 is fully retracted.
4. Press the locking button 5 and the release button 4 to-
gether and slide the ISOFIX locking arm 3 back into the
bottom section of the seat.
5. Slide the second ISOFIX locking arm 3 back into the
bottom section of the seat as well.
P Both ISOFIX locking arms 3 are protected against dam-
age.
9