HIKVISION Turbo HD DS-2CE76H8T-ITMF Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HIKVISION Turbo HD DS-2CE76H8T-ITMF. HIKVISION Turbo HD DS-2CE76H8T-ITMF 17 pages. Turret & dome camera
Imprimer la page
2.3 Ceiling Mounting of Type III Camera
Steps:
1. Paste the dill template to the ceiling.
2. Drill the screw holes and cable hole (optional) in the
ceiling according to the drill template.
Note:
Cable hole is required, when adopting the ceiling
outlet to route cables.
3. Loosen the screws with a hex wrench (supplied) to
remove the bubble.
4. Fix the mounting base on the ceiling with supplied
screws.
5. Route the cables through the cable hole, or the side
opening.
6. Connect the corresponding cables, such as power
cord, and video cable.
7. Power on the camera to check whether the image on
the monitor is gotten from the optimum angle. If not,
adjust the camera according to the figure below to get
an optimum angle
Figure 2-14 Type I Camera 2-Axis Adjustment
1). Loosen the tilt adjusting screw to adjust the tilt
position [0° to 75°].
Figure 2-11 Drill Template
Figure 2-12 Remove the Bubble
Figure 2-13 Fix the Mounting Base
0° to 75°
0° to 355°
Adjusting Screw
0° to 355°