HIKVISION Turbo HD DS-2CE76H8T-ITMF 사용자 설명서 - 페이지 9

{카테고리_이름} HIKVISION Turbo HD DS-2CE76H8T-ITMF에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION Turbo HD DS-2CE76H8T-ITMF 17 페이지. Turret & dome camera

2.3 Ceiling Mounting of Type III Camera

Steps:

1. Paste the dill template to the ceiling.

2. Drill the screw holes and cable hole (optional) in the

ceiling according to the drill template.

Note:

Cable hole is required, when adopting the ceiling

outlet to route cables.

3. Loosen the screws with a hex wrench (supplied) to

remove the bubble.

4. Fix the mounting base on the ceiling with supplied

screws.

5. Route the cables through the cable hole, or the side

opening.

6. Connect the corresponding cables, such as power

cord, and video cable.

7. Power on the camera to check whether the image on

the monitor is gotten from the optimum angle. If not,

adjust the camera according to the figure below to get

an optimum angle

Figure 2-14 Type I Camera 2-Axis Adjustment

1). Loosen the tilt adjusting screw to adjust the tilt

position [0° to 75°].

Figure 2-11 Drill Template

Figure 2-12 Remove the Bubble

Figure 2-13 Fix the Mounting Base

0° to 75°

0° to 355°

Adjusting Screw

0° to 355°