HIKVISION Turbo HD DS-2CE76H8T-ITMF 사용자 설명서 - 페이지 8

{카테고리_이름} HIKVISION Turbo HD DS-2CE76H8T-ITMF에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION Turbo HD DS-2CE76H8T-ITMF 17 페이지. Turret & dome camera

Figure 2-8 Fix the Mounting Base to the Ceiling

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

For cement wall/ceiling, expansion bolts are



required to fix the camera. For wooden wall/ceiling,

self-tapping screws are required.

6. Route the cables through the cable hole, or the side

opening.

7. Secure the camera on the mounting base.

1） pull out the clip plate, and then to combine the

camera with the mounting base.

2） Push the clip plate in, and secure the camera by

tightening the screw.

8. Connect the corresponding cables, such as power

cord, and video cable.

9. Power on the camera to check whether the image on

the monitor is gotten from the optimum angle. If not,

adjust the camera according to the figure below to get

an optimum angle.

1). Hold the camera body and rotate the enclosure to

adjust the pan position [0° to 360°].

2). Move the camera body up and down to adjust the

tilt position [0° to 75°].

3). Rotate the camera body to adjust the rotation

position [0° to 360°].

Note:

Loose the screw on the mounting base before

adjusting the monitoring angle.

Figure 2-9 Secure the Camera

Figure 2-10 3-axis Adjustment