HIKVISION TURBO HD H0T Series Manuel de l'utilisateur - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HIKVISION TURBO HD H0T Series. HIKVISION TURBO HD H0T Series 17 pages. Turbo hd turret & dome camera
Également pour HIKVISION TURBO HD H0T Series : Manuel de l'utilisateur (16 pages), Manuel de l'utilisateur (16 pages), Manuel de l'utilisateur (14 pages)
Imprimer la page
For cement ceiling, expansion bolts are required to
fix the camera. For wooden ceiling, self-tapping
screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Connect the corresponding cables, such as power
cord, and video cable.
7. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
8. Fit the bubble back to the camera.
Figure 2-15 Fit the Black Liner Back
9. Tighten the screws on the bubble of the dome
camera to finish the installation.
Tilt Position
0° to 75°
Figure 2-14 3-Axis Adjustment
Figure 2-16 Finish Installation
Pan Position
0° to 355°
Rotation Position
0° to 355°